[Valve structure drawing]

Screw gate valve main material in American Standard
：

[Standard parameter]

[Valve features]

1, the gate has two sealing surfaces, the sealing surface to form a wedge, wedge angle varies with valve parameters, usually 5 degrees.
2, wedge gate valve sealing principle is combined by two on the two upper wedge sealing surface and sealing surface of the valve body wedging, thereby sealing performance.
3, wedge gate valve according to the stem drive gate opening and closing different ways, can be divided into bright rod gate valve (lift rod gate valve) and dark rod gate valve (rotary rod gate valve).
4, wedge gate valve in accordance with the different forms of the gate structure, can be divided into elastic gate valve and rigid gate valve.
5, the valve body for casting molding, valve body and valve cover with bolt connection, the middle flange using spiral gasket seal, the customer has special requirements can also be used metal ring connection.
6, the channel is smooth, the flow coefficient is small. The sealing surface is eroded and eroded by medium.
7, The sealing surface is made of alloy steel or hard alloy. It has good abrasion resistance and scratch resistance.
8, flexible graphite packing, reliable sealing, easy and flexible operation.
9, medium flow unrestricted, no disturb, do not reduce pressure.

[Adaptive condition]
Stainless steel valve for the nominal pressure of PN1.6 ~ 16.0MPa, -29 pipeline working temperature less than 550 DEG C, hydraulic oil and chemical industry, thermal power plants of various systems, cut off or connected piping media.